FREE GROUND SHIPPING ON 5 GALLON PAILS of this product when purchased online and shipped to the 48 contiguous United States. Offer does not apply to Alaska or Hawaii. Free shipping applies to this item only—not the entire order.
Sikkens ProLuxe. Same high-quality, trusted Sikkens formula.
With a heritage of over 200 years of providing premium wood finishes for both exterior and interior wood, the Sikkens brand became Sikkens ProLuxe in 2015, joining the PPG Architectural Coatings family. The generations of professionals and homeowners who have relied on the Sikkens ProLuxe products for superior protection and enhancement of the natural beauty of wood can be assured that the product formulas have remained the same.
Sikkens ProLuxe Cetol Maintenance RE is a premium, clear, exterior satin finish to be applied over Sikkens ProLuxe Cetol 23 RE or Sikkens ProLuxe Cetol Log & Siding as a non-darkening maintenance coat to revive the sheen and extend the life of the previous finish. Cetol Maintenance RE may only be applied to surfaces that are in good condition, and have been maintained according to Sikkens ProLuxe maintenance guidelines.
Sikkens ProLuxe Cetol Maintenance RE Use Guidelines:
- Cetol Maintenance RE is to be used exclusively over existing Cetol 23 RE or Cetol Log & Siding as a maintenance coat—Not as a stand-alone system. Do not use on bare wood.
- Apply only to surfaces that are in good condition, and have been maintained according to Sikkens ProLuxe maintenance guidelines.
- Do not apply Cetol Maintenance RE to decks, entry doors, or outdoor furniture.
- Do not apply over Cetol Door & Window, Cetol SRD or Cetol DEK Finish.
Features of Sikkens ProLuxe Cetol Log & Siding include:
- High-solids alkyd-oil formula, satin finish
- High-transparency transoxide pigments amplify protection
- Clear (non-pigmented) finish does not darken the existing finish
- Powerful UV absorbers protect color and wood substrate
- Water-repellent finish
- Excellent breathability and flexibility
- Provides a mildew-resistant finish
Application Guide:
Where to use: Exterior logs, siding and other vertical wood surfaces
Recommended for: Log homes, siding, garage doors, trim
Stain type: Solvent based
Sheen: Satin (clear; non-pigmented)
Coats: 1
Application temperature: 50° F to 90° F
Application method: Airless sprayer, roller or brush; back-brushing required
Clean up: Mineral spirits
Drying time: (At 77° F and 50% relative humidity)
Dries to touch in approximately 6 hours
Dries to hard in 24-48 hours
Coverage: 400-500 sq. ft. per gallon (on properly prepared surfaces)
Coverage depends on porosity of wood