Skip to content
Proven Products & Proven Solutions
Proven Products & Proven Solutions

Lifeline Advance Clear Exterior Top Coat

Perma-Chink Lifeline Advance is designed as a clear topcoat for all Lifeline exterior finishes.  In addition to enhancing the beauty of the finish, it adds extra water repellency, UV resistance, and mold and mildew protection to extend the life of your stain.  Even while adding extra water repellency, Lifeline Advance still maintains the breathability that is so necessary for your logs.  Available in Gloss and Satin sheens.

FREE GROUND SHIPPING ON 5 GALLON PAILS of this product when purchased online and shipped to the 48 contiguous United States.

$101.99

FREE GROUND SHIPPING ON 5 GALLON PAILS of this product when purchased online and shipped to the 48 contiguous United States. Offer does not apply to Alaska or Hawaii. Free shipping applies to this item only—not the entire order.


Lifeline Advance works just like the clear-coat on your car to protect the finish underneath. It extends the life of the finish system while adding depth and highlights to the appearance. It also makes exterior walls easier to clean.

Lifeline Advance is formulated to provide additional water repellency while still maintaining the breathability that is so necessary for your logs.  Lifeline Advance is the second component in Perma-Chink’s exterior wall finish system that includes a limited warranty when used with Lifeline Ultra-2 or Lifeline Ultra-7.  Lifeline Advance is non-yellowing, and provides mold and mildew protection for your logs.

Application Guide:

 

Where to use:                         Exterior – For use over Lifeline Exterior, Ultra-2, Ultra-7, or Accents stains

Stain type:                               Water-based

Sheen:                                      Gloss or Satin

Coats:                                       1 coat initially; 1 coat 36 months later; then only as required

Surface prep:                          Clean and dry; free of mold and mildew; never use steel wool

Application temperature:    40°F to 90°F

Application method:            Airless sprayer or brush; back-brushing required

Clean up:                                 If wet:  Soap and water

                                                  If dried:  Soften with alcohol or mineral spirits; then soap and water

Drying time:                           Dry to the touch in 2-4 hours; cures in 72 hours

Coverage:                                Smooth surfaces:  600-800 sq. ft. per gallon

                                                  Rough surfaces:   500-700 sq. ft. per gallon

                                                  Coverage depends on porosity of wood