Skip to content
Proven Products & Proven Solutions
Proven Products & Proven Solutions

Abatron WoodEpox Wood Replacement Compound

WoodEpox is a shrink-free adhesive putty wood replacement compound that fills, and permanently replaces missing wood in decayed and deteriorated wood.  WoodEpox can be used indoors and outdoors on both structural and decorative substrates, and can be used to bond or bridge separated sections of wood.  WoodEpox is commonly used to fill and replace missing wood after decayed or deteriorated wood has been hardened and consolidated with LiquidWood.


WoodEpox is a two-component epoxy putty wood replacement compound that can be used in any thickness in structural and decorative applications to replace, repair, extend, or fill wood and other materials.

Uses:  WoodEpox is ideal for repairing, replacing, or adding to wood and most rigid surfaces, as well as to dried out, rotted or spongy wood consolidated with LiquidWood.   Use on windowsills, thresholds, window and door frames, columns, stair steps, balustrades, floors, capitals, moldings, doors, shutters, indoor and outdoor furniture, statues, and archaeological and art restoration.

Features and Benefits:  WoodEpox bonds permanently with high strength to most surfaces.  It fills cracks, holes, and voids of any size without the shrinking and crumbling of common wood fillers.  WoodEpox can be cast into shapes and sculpted by hand before hardening.   After hardening, it can be painted, stained, wood-grained, sawed, nailed, planed, sanded, carved, and machined like wood.  WoodEpox contains no VOC’s or noxious odors.   Cold weather formulation is available for application temperatures as low as 35° F.  100% compatible with LiquidWood.

Application Guide:

WoodEpox is a lightweight epoxy adhesive system consisting of two components:  resin paste (A) and hardener paste (B).  Mix A and B in equal volumes.  Apply by (gloved) hand or with a putty knife or trowel.   The blend hardens within 1-2 hours into a lightweight, non-shrinking, tough adhesive mass with high dimensional stability, and chemical, water, heat and weather resistance.  100% epoxy solids.  Waterproof.   Application temperature range:   50-90° F.  1:1 ratio of resin paste (A) and hardener paste (B).  20 minute pot life.  WoodEpox can be thinned with LiquidWood.


   Instruction Sheet 

   Safety Data Sheet